EN LJ 2200 Service mode functions 95
2
Setting the cold-reset default
The customization variable will determine the default paper size after a
cold reset. This is set to A4/letter at the manufacturer. This variable
might need to be reset when the formatter is replaced.
PJL command Description
E
C
%-12345X@PJL Start PJL job
@PJL SET SERVICEMODE
=HPBOISEID
Enter Service mode
@PJL SET CRPAPER=LETTER Set cold reset page size [=Letter/A4]
@PJL SET SERVICEMODE=EXIT Exit Service mode
@PJL RESET Perform PJL reset
E
C
%-12345X Exit PJL mode
E
C
Z Print self-test/configuration page
E
C
E Reset the printer
To Next Page
Loading...