Physical specifications
Table C-1 Physical specifications
Height Depth Width
Weight
1
308 mm (12.13 inches) 363 mm (14.3 inches) 437 mm (17.2 inches) 8.3 kg (18.4 lb)
1
Weight does not include print cartridge, which weighs 0.7 kg (1.5 lb).
Electrical specifications
CAUTION Power requirements are based on the country/region where the device is sold. Do
not convert operating voltages. This will damage the device and void the product warranty.
Table C-2 Electrical specifications
Item 110-volt models 220-volt models
Power requirements 110 to 127 V (+/- 10%)
50 / 60 Hz (+/- 2 Hz)
220 to 240 V (+/- 10%)
50 / 60 Hz (+/- 2 Hz)
Rated current 3.5 A 2.5 A
Power consumption
Table C-3 Power consumption (average, in watts)
1
,
2
Printing Copying
Ready/Sleep
3
Off
227 W 227 W 6 W 0.1 W
1
Values are based on preliminary data. See www.hp.com/support/ljm1005 for current information.
2
Power reported is highest values measured for monochrome printing/copying using all standard voltages.
3
The default time from Ready mode to Sleep mode and the recovery time from Sleep mode to start of printing is less than
10 seconds because of instant-on fusing.
4
Maximum heat dissipation for all models in Ready mode = 51.2 BTU/hour.
5
Print speed is 15 ppm letter-size and 14 ppm A4-size.
Environmental specifications
Table C-4 Environmental specifications
Recommended
1
Operating
1
Storage
1
(Device and print cartridge)
Temperature
20° to 27°C
(68° to 81°F)
15° to 32.5°C
(59° to 90.5°F)
0° to 40°C
(32° to 104°F)
Relative humidity 20% to 70% 10% to 80% 90% or less
1
Values are subject to change. See the support Web sites listed in HP Customer Care for current information.
114 Appendix C Device specifications ENWW
To Next Page
Loading...