HP M1005 MFP

Software for Macintosh
This section describes how to install Macintosh printing system software.
Installing Macintosh device software
1. Connect a USB cable between the USB port on the printer and the USB port on the computer.
Use a standard 2-meter (6.56-foot) USB cable.
2. Insert the printer CD into the CD-ROM drive and run the installer.
The Printer Setup Utility should automatically launch. If it does not launch, continue to the next
step.
3. Double-click the hard drive icon on the desktop.
4. Open the Applications folder, and then open the Utilities folder.
5. Double-click Printer Setup Utility, and then follow the onscreen instructions to install the
software.
Uninstalling Macintosh device software
1. Double-click the hard drive icon on the desktop.
2. Open the Applications folder, and then open the Utilities folder.
3. Double-click Printer Setup Utility.
4. In the Printer Setup Utility, select the device, and then click Delete on the toolbar.
ENWW Software for Macintosh 11