HP M1005 MFP

2. Gently close the lid.
3. Gently press down on the lid to press the book to the flatbed scanner surface.
4. Press Start Copy.
Viewing copy settings
Use the More Copy Settings button to see the copy settings for the current copy job.
1. Press More Copy Settings to see the current setting for copy contrast.
2. Continue to press More Copy Settings to scroll through the copy settings for the current copy
job. Settings should appear in the following order: copy contrast, copy quality, media size,
media type, reduction/enlargement, and number of copies.
Use the < or the > button to change the settings, and then press Menu/Enter.
ENWW Viewing copy settings 55