HP M1522nf - LaserJet MFP B/W Laser - Page 133

3. Remove six screws (callout 3) and the sheet-metal plate (callout 4).
Figure 5-70 Remove the power supply (2 of 7)
2
3
4
4. Disconnect three FFCs (callout 5) and six wire-harness connectors (callout 6).
CAUTION: Do not bend or fold the FFCs during the removal or reinstallation process.
Figure 5-71 Remove the power supply (3 of 7)
6
6
6
5
6
ENWW Product base 115