Laser/scanner assembly
1. Remove the following assemblies:
●
Scanner assembly. See
Scanner assembly on page 90.
●
Right and left cover. See
Side covers on page 104.
●
Print-cartridge door. See
Print-cartridge door on page 106.
●
Rear cover and fuser cover. See
Rear cover and fuser cover on page 107.
●
Front cover. See
Front cover on page 109.
●
Scanner support-frame. See
Scanner support-frame on page 118.
2. Remove three screws (callout 1) and one sheet-metal bracket (callout 2).
Figure 5-81 Remove the laser/scanner (1 of 7)
2
1
1
ENWW Product base 121
To Next Page
Loading...