Service menu
Use the control-panel Service menu to solve product problems.
Service menu item Submenu option Description
Print T.30 trace At end of call*
Never
Now
If error
Use a T.30 trace report to problem solve
fax transmission and receive errors.
Archive print Off*
On
The archive print feature produces
output that is less susceptible to toner
smearing and dusting. Use archive print
to create documents that you want to
preserve or archive.
lESS PAPER CURL Off*
On
Lowers the fuser temperature.
PowerSave time 2 Hours
4 Hours
8 Hours*
12 Hours
Use this item to set the amount of time
before the product enters PowerSave
mode.
Cleaning mode None Press OK to start the cleaning process.
See
Clean the paper path on page 34 for
more information.
Restore defaults None CAUTION: This procedure clears fax
numbers and names that are associated
with one-touch keys and speed-dial
codes, and deletes any pages that are
stored in the memory. The procedure
then automatically restarts the product.
Press OK to restore the product factory
settings.
Restore the factory-set defaults
Restoring the factory-set defaults returns all of the settings to the factory defaults, and it also clears the
fax header name and phone number.
CAUTION: This procedure clears fax numbers and names that are associated with one-touch keys
and speed-dial codes, and deletes any pages that are stored in the memory. The procedure then
automatically restarts the product.
1.
On the product control panel, press Setup
.
2. Use the arrow buttons to select Service, and then press OK.
3. Use the arrow buttons to select Restore defaults, and then press OK.
The product automatically restarts.
ENWW Problem-solve tools 189
To Next Page
Loading...