●
Fuser
●
ITB cleaning
●
Drum cleaning
These processes are divided into nine steps, which are shown in
Figure 1-9 Image-formation process
on page 11 and described in the following sections.
Figure 1-9 Image-formation process
Latent image formation
Transfer
Fuser
ITB cleaning
Development
Pickup
Registration
5. Secondary transfer
6. Separation
7. Fusing
Delivery
4. Primary transfer
2. Laser beam exposure
3. Development
8. ITB cleaning
9. Drum cleaning
1. Primary charging
: Media path
: Direction of drum rotation
: Block
: Step
Photosensitive drum cleaning
Latent-image formation stage
During the two steps that comprise this stage, a latent image is formed by applying a negative charge
to the photosensitive drum. You cannot see this image on the drum.
ENWW
Image-formation system
11
To Next Page
Loading...
