HP M3035 - LaserJet MFP B/W Laser - Page 129

Stapler
1. Remove the following components:
●
Right-side cover (see
Right-side cover on page 94)
●
Formatter shield (see
Formatter shield on page 95)
●
Fax cover (see
Fax cover on page 96)
●
Left-side cover (see
Left-side cover on page 97)
●
ADF/scanner assembly (see
Scanner assembly on page 90)
2. Remove one screw (callout 1) from the stapler cover and then lift the cover off of the device.
1
Figure 5-38 Removing the stapler (1 of 3)
ENWW Stapler 117