HP M3035 - LaserJet MFP B/W Laser - Page 132

4
5
Figure 5-41 Reinstalling the stapler (1 of 3)
Reinstallation tip For correct placement, insert the metal tab at the back of the stapler
(callout 4) into the slot in the chassis (callout 5). The following figure shows correct placement of
the metal tab in callout 6 and incorrect placement of the metal tab in callout 7.
6
7
Figure 5-42 Reinstalling the stapler (2 of 3) – correct (callout 6) and incorrect (callout 7) reinstallation
of the metal tab.
120 Chapter 5 Removal and replacement ENWW