Jam locations
Use this illustration to locate media jams in the device. For instructions about clearing jams, see the
section listed for each jam location.
1
2
3
4
5
1 Automatic document feeder (ADF) See Clear jams from the ADF on page 217.
NOTE If documents jam frequently in the ADF,
make sure that the ADF input tray is installed correctly
(see
Figure 5-5 Reinstalling the ADF input tray
on page 83). ADF jams and skew can result from
incorrect reinstallation.
2 Print cartridge See Clear jams from the print-cartridge area on page 219.
3 Input trays See Clear jams from the input-tray areas on page 220.
4 Duplex path (for two-sided printing) See Clear jams from the duplexer on page 222.
5 Output bins See Clear jams from the output-bin areas on page 223.
ENWW Clear jams 215
To Next Page
Loading...