Low-level boot-up key sequence for selecting a language, performing a cold reset, and
enabling and disabling embedded LAN
1. Turn off the device.
2. Turn on the device.
3. When the control-panel display shows that the device has begun to count the memory, press and
hold the 6 key.
4. When the LED lights turn on, release the 6 key.
5. Use the 3 and 9 keys to scroll through the options (select language, cold reset, embedded LAN
enable, and embedded LAN disable) and then press the 6 key to select the option you want.
The device continues the power-on sequence.
Medium-level boot-up key sequence for initializing disks
1. Turn off the device.
2. Turn on the device.
3. When the control-panel display shows that the device has begun to count the memory, press and
hold the Start key.
4. When the LED lights turn on, release the Start key.
NOTE Initialize disks is the only option available when using the medium-level boot-up key
sequence.
5. Press the 6 key to select Initialize disks.
The device continues the power-on sequence.
High-level boot-up key sequence for NVRAM initialization, manufacturing, and skipping
disk-load and calibration
1. Turn off the device.
2. Turn on the device.
3. When the control-panel display shows that the device has begun to count the memory, press and
hold the 9 key.
4. When the LED lights turn on, release the 9 key.
5. Press the 3 key, and then press the Start key.
6. Use the 3 and 9 keys to scroll through the options (skip disk-load, NVRAM init, manufacturing, and
skip calibration) and then press the 6 key to select the option you want.
The device continues the power-on sequence.
ENWW Service mode functions 227
To Next Page
Loading...