3. Remove the new print cartridge from the bag. Place the used print cartridge in the bag for recycling.
4. Grasp both sides of the print cartridge and distribute the toner by gently rocking the print cartridge.
CAUTION Do not touch the shutter or the surface of the roller.
5. Remove the shipping tape and the orange tab from the new print cartridge. Discard the shipping
tape according to local regulations.
6. Align the print cartridge with the tracks inside the device, and, using the handle, insert the print
cartridge until it is firmly seated, and then close the upper-right door.
After a short time, the control panel should display Ready.
ENWW Replace supplies and parts 95
To Next Page
Loading...