5. If the disengaging operation of the upper stacking roller is detected as normal, the staple stacker
driver drives the jogger motor (M2100) and shifts the jogger guide to the waiting position from the
turnout position.
Waiting position
Turnout position
Jogger guide
Figure 4-48 Staple mode (2 of 7)
6. The staple stacker driver rotates the motor (M2102) to engage the upper and lower stacking rollers
after the jogger guide has been shifted to the waiting position. The paper can then be fed to the
jogger guide.
Staple stacker
Printer
Paper
Upper stacking roller
Lower stacking roller
Feed rollers
Feed roller
Jogger guide
Figure 4-49 Staple mode (3 of 7)
7. The staple stacker driver rotates the motor (M2102) again to separate the upper stacking roller
from the lower stacking roller after the paper reaches at the specified position on jogger guide.
ENWW Stapler/stacker component 163
To Next Page
Loading...