12. The staple stacker driver turns the stamp solenoid (SL2101) ON and clamps the pad against the
paper by the pad pull-up control. This action positions the paper. At the same time, the jogger guide
shifts to the waiting position, and the leading-end alignment roller shifts to the waiting position.
Staple stacker
Printer
Pad
SR2100
Paper
Upper stacking roller
Lower stacking roller
Figure 4-52 Staple mode (6 of 7)
13. The staple stacker driver performs the stapling operation.
14. After the stapling operation is complete, the staple stacker driver engages the upper and the lower
stacking rollers.
15. The staple stacker driver rotates the upper and the lower stacking rollers and feeds the stapled
pile of paper.
16. The staple stacker driver shifts the jogger guide to the turnout position. This allows the paper pile
on the jogger guide to drop on the stacking tray.
Upper stacking roller
Lower stacking roller
Paper
Drop
Waiting position
Turnout position
Paper
Jogger guide
Jogger guide
Figure 4-53 Staple mode (7 of 7)
Stacking roller separation control
ENWW Stapler/stacker component 165
To Next Page
Loading...