Staple stacker driver PCA
Jogger guide
Jogger gear
M2100
langis EVIRD ROTOM REGGOJ
CW CCW
Figure 4-61 Jogger control
1. Before the operation, the jogger guide stays at the turnout position.
Jogger guide
Turnout position
Figure 4-62 Jogger control process (1 of 4)
2. When paper feeding starts in staple mode, the staple stacker driver reverses the motor (M2100).
When it detects that the upper stacking rollers are separated. Then the jogger guide shifts to the
waiting position.
Paper
Waiting position
Figure 4-63 Jogger control process (2 of 4)
170 Chapter 4 Theory of operation ENWW
To Next Page
Loading...