ADF assembly
1. Use a small flat-blade screwdriver to carefully remove four adhesive screw caps (callout 1).
NOTE Do not damage the caps when you remove them. Do not excessively handle the
adhesive side of the caps. Skin oils will damage the adhesive on the back of the caps.
1
Figure 5-38 Remove the ADF (1 of 4)
2. Remove four screws (callout 2) and remove the SCB cover.
2
Figure 5-39 Remove the ADF (2 of 4)
204 Chapter 5 Removal and replacement ENWW
To Next Page
Loading...