Rear end cover (cap)
1. Remove the ADF. See ADF assembly on page 204.
2. Open the ADF jam cover and remove one screw (callout 1).
Tip This screw has a star washer. Make sure that you use the correct screw when you
reinstall the rear end cover.
Figure 5-67 Remove the ADF rear end cover (1 of 5)
3. Turn the ADF over and remove five screws (callout 2).
Figure 5-68 Remove the ADF rear end cover (2 of 5)
ENWW ADF 221
To Next Page
Loading...