Loose toner, in this context, is defined as toner that can be rubbed off the page.
1. If media is heavy or rough, open the Administration menu at the device control panel. On the Print
Quality submenu, select Fuser Modes, and then select the media type you are using.
2. If you have observed a rougher texture on one side of your media, try printing on the smoother
side.
3. Make sure that the environmental specifications for the device are being met. See
Operating
environment on page 826.
4. Make sure that type and quality of the media you are using meet HP specifications.
486 Chapter 6 Troubleshooting ENWW
To Next Page
Loading...