Print Quality menu
NOTE Values shown with "(default)" are the factory-default values. Some menu items have no
default.
Table 3-16 Print Quality menu
Menu item Sub-menu item Values Description
Set Registration Source All trays
Tray <X>: <contents>
(choose a tray)
Use Set Registration to shift the margin alignment to
center the image on the page from top to bottom and
from left to right. You can also align the image on the
front with the image printed on the back.
Select the source input tray for printing the Set
Registration page.
Print Test Page Print (button) Print a test page for setting the registration. Follow the
instructions that are printed on the page to adjust each
tray.
Adjust Tray <X> Shift from -20 to 20 along
the X or Y axes. 0 is the
default.
Perform the alignment procedure for each tray.
When it creates an image, the device scans across the
page from side to side as the sheet feeds from top to
bottom into the device.
Fuser Modes <Paper Type> Configure the fuser mode associated with each media
type.
Restore Modes Restore (button) Restore the fuser modes to the default settings.
Optimize High Transfer Normal (default)
Increased
Optimize print engine parameters to get the best
possible print quality for all jobs (in addition to
specifying media type).
●
Set High Transfer to Increased if portions of the
printed image appear to have too much toner.
●
Set Line Detail to On if printed lines or text is
blurred. This reduces toner scatter.
●
Set More Separation 1 to On to reduce jams in the
print cartridge during simplex printing.
●
Set More Separation 2 to On to reduce jams in the
print cartridge during duplex printing.
Line Detail Off (default)
On
More Separation 1 Off (default)
On
More Separation 2 Off (default)
On
Restore Optimize Restore (button) Reset all the Optimize parameters to the factory default
settings.
Resolution 300
600
FastRes 1200 (default)
ProRes 1200
Use this feature to select the print resolution.
●
300: Produces draft print quality and can be used
for compatibility with the HP LaserJet III family of
printers.
●
600: Produces high print quality and can be used
for compatibility with the HP LaserJet 4 family of
printers.
64 Chapter 3 Manage and maintain the device ENWW
To Next Page
Loading...