Menu item Sub-menu item Sub-menu item Values Description
Paper Path Test
Test Page
Print (button) Generate a test page for testing the paper
path. You can define the path that is used for
the test by using the following options in order
to test specific paper paths.
Source All trays
Tray 1
Tray 2
(Additional trays are
shown, if applicable.)
Specify whether the test page will be printed
from all trays or from a specific tray.
Destination A list of output bins
appears.
Select the output option for the test page. You
can choose to send the test page to all output
bins or only to a specific bin.
Duplex Off (default)
On
Select whether the duplexer should be
included in the Paper Path test.
Copies 1 (default)
10
50
100
500
Select how many pages should be sent from
the specified source as part of the Paper Path
test.
Table 3-17 Troubleshooting menu (continued)
ENWW Use the Administration menu 69
To Next Page
Loading...