Connecting the Speakers 33
Configure Multi-Channel Audio for Sound Manager
To configure multi-channel audio output for PCs with
Multi-channel Sound Manager:
1 Click Start on the taskbar.
2 Choose All Programs.
3 Choose Music and then click Multi-
channel Sound Manager. The Multi-
channel Audio Configuration window opens.
4 Click the Speaker Configuration tab.
(Your speakers may need to be plugged in to
see this tab.)
5 Select the option describing the number of
speakers in your system, for example, 6/5.1
speaker mode. You can click the Speaker
Test tab and then click each speaker to test it.
6 Click OK.
Enable Digital Audio Output (Optional)
1 Follow steps 1–5 of the previous procedure. 2 Place a check next to Enable digital audio
output. The Output digital and analog
option is automatically selected.
n
If you select Enable
digital audio out:
■ Microphone
volume setting
becomes not
muted.
■ If you place the
microphone too
close to the
speakers, feedback
can occur.
■ The recording
source is fixed in
Stereo Mix.
To Next Page
Loading...
