Hardware options installation 51
11.
Connect the battery/capacitor pack cable to the pack.
12. Install the battery/capacitor pack.
13. Install the full-length expansion board retainer, if any full-length expansion boards were removed
("Installing the full-length expansion board retainer" on page 23).
14. Install the air baffle ("Installing the air baffle" on page 22).
15. Install the access panel ("Installing the access panel" on page 21).
16. Install the bezel ("Installing the front bezel" on page 20).
17. Power up the server (on page 19, "Powering up and configuring the server" on page 29).
Expansion board options
The server supports PCIe Gen 2 expansion boards.
To Next Page
Loading...
