1–10 Notebook Tour
Components
Component Description
1 Power button When the computer is
■ Off, press to turn on the computer.
■ On, press to enter hibernation.
■ In standby, briefly press to exit
standby.
■ In hibernation, briefly press to exit
hibernation.
If the computer has stopped
responding and Windows shutdown
procedures cannot be used, press
and hold the power button for at least
5 seconds to turn off the computer.
2 Display switch Initiates standby if the display is closed
while the computer is on.
3 Wireless button* Turns the wireless feature on or off, but
does not create a wireless connection.
✎
To establish a wireless connection, a wireless network must
already be set up.
*This table describes default settings. For information about changing
default settings, refer to the user guides located in the Help and Support
Center.
To Next Page
Loading...
