1–22 Notebook Tour
Components
3 Accessory battery connector Connects an optional accessory
battery pack.
4 Docking connector Connects the computer to an optional
docking device.
5 Primary battery pack release
latches (2)
Release the primary battery pack
from the battery bay.
6 Battery bay Holds the primary battery pack.
7 Vents (4)* Enable airflow to cool internal
components.
Ä
To prevent overheating, do not obstruct vents. Use the computer
only on a hard, flat surface. Do not allow another hard surface,
such as an adjoining optional printer, or a soft surface, such as
pillows or thick rugs or clothing, to block airflow.
✎
The computer fan starts up automatically to cool internal
components and prevent overheating. It is normal for the
internal fan to cycle on and off during routine operation.
*Depending on your computer model, the vents on the computer may
vary in number and location.
Component Description
To Next Page
Loading...
