EasyManua.ls Logo

HP office jet 6950 - Change the connection type

HP office jet 6950
174 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NOTE: Before you proceed, go through the list at Before you begin.
1.
From the printer control panel display, touch (Wireless).
2.
Touch ( Settings ).
3. Touch Wireless Settings.
4. Touch Wireless Setup Wizard or Wi-Fi Protected Setup.
5. Follow the display instructions to complete the setup.
If you are already using the printer with a dierent type of connection, such as a USB connection, follow the
instructions in Change the connection type to set up the printer on your wireless network.
Change the connection type
After you have installed the HP printer software and connected the printer to your computer or to a network,
you can use the software to change the connection type (for example, from a USB connection to a wireless
connection).
To change from a USB connection to a wireless network (Windows)
Before you proceed, go through the list at Before you begin.
1. Open the HP printer software. For more information, see Open the HP printer software (Windows) .
2. Click Tools.
3. Click Device Setup & Software.
4. Select Convert a USB connected printer to wireless. Follow the onscreen instructions.
To change from a USB connection to a wireless connection (OS X)
1. Remove the USB cable from the printer.
2. Restore the printer to its network defaults. For more information, see Restore original factory defaults
and settings.
3. Download the most recent version of HP Easy Start from 123.hp.com.
4. Open HP Easy Start and follow the onscreen instructions to connect your printer.
Learn more about how to change from a USB to wireless connection. Click here to go online for more
information. At this time, this website might not be available in all languages.
To change from a wireless connection to a USB connection (Windows)
Connect the printer and the computer with the provided USB cable. This USB port is at the rear of the
printer. For the specic location, see Back view .
To change from a wireless connection to a USB connection (OS X)
1. Open System Preferences .
2. Click Printers & Scanners .
ENWW Set up the printer for wireless communication 87

Table of Contents

Related product manuals