1 PictBridge/USB Host Port – Connects a PictBridge device, such as a digital camera or a
USB Flash drive.
2 Battery contact cover – Covers the battery contacts when the optional battery is not
installed.
3 USB port – Connect a USB cable here.
4 Battery slot – Install optional battery here.
5 Power connector – Connect the power cord here.
Printing supplies area
2
1
3
1 Front access cover – Provides access to the ink cartridges and for clearing paper jams.
This cover must be closed before printing can begin.
2 Print cartridge latches – Lift these latches for easy removal and insertion of print
cartridges.
3 Print cartridge cradle compartments – Holds the print cartridges.
Control Panel
Chapter 1
10 Get started
To Next Page
Loading...