Ink level warnings and indicators provide estimates for planning purposes only. When
you receive a low-ink warning message, consider having a replacement cartridge
available to avoid possible printing delays. You do not need to replace the ink
cartridges until print quality becomes unacceptable.
For more information about ordering ink cartridges for the device, see
Order printing
supplies online.
To replace the ink cartridges
Use these instructions to replace an ink cartridge.
1. Remove the new ink cartridge from its package and then pull the colored tab to
remove the protective film from the cartridge.
1 Copper-colored contacts
2 Plastic tape with pink pull tab (must be removed before installing)
3 Ink nozzles under tape
2. With the printer turned on, open the front access cover. Wait for the carriage to
stop moving. This should take only a few seconds.
CAUTION: Only remove or install ink cartridges when the ink cartridge
carriage stops moving.
Chapter 3
34 Work with ink cartridges
To Next Page
Loading...
