Light description/Light pattern Explanation and recommended action
Battery status light is red. Battery is less than 10% charged and
printer is turned on and idle. Power cord not
plugged in.
Plug in the power cord to begin recharging
the battery. See
Install and use the battery.
Battery status light is blinking red. Battery is less than 2% charged and printer
is turned on and idle. Power cord not
plugged in.
Plug in the power cord to begin recharging
the battery. See
Install and use the battery.
Battery charging light is amber; battery status
light is green, amber, or red.
Battery is charging. Battery status light
indicates charge level.
NOTE: When the battery is fully charged,
the battery charging light turns off.
No action required.
Battery charging light is red. Power cord is plugged in and battery is
detected but faulty.
Replace the battery. See
HP supplies and
accessories.
Power light blinks. Printer is printing, turning on or off, or
waiting for ink to dry.
No action required.
Power light is on and Bluetooth light is blue. Bluetooth wireless is turned on.
No action is required.
(continued)
Control panel lights reference 65
To Next Page
Loading...
