●
If the feature to automatically detect paper size is turned on, adjust the paper-width guides till they
touch the edge of the paper so that the printer can detect the paper width.
●
If you are loading custom paper size, adjust the paper-width guides to a width that is closest to the
custom width so that the printer can detect the closest width; if need, change the paper size from the
printer control panel.
To load standard-size paper
1. Open the top cover and lift the control panel.
2. Slide the two paper-width guides out as far as possible.
3. Insert the paper print-side up and slide the paper-width guides till they t snugly against the sides of
the paper.
Do not use the paper illustrated in the following graphic.
NOTE: Do not load paper while the printer is printing.
To load envelopes
1. Open the top cover and lift the control panel.
12 Chapter 2 Get started ENWW
To Next Page
Loading...