2. Slide the two paper-width guides out as far as possible.
3. Insert the envelope print-side up and the long-edge ap on the left or the short-edge ap at the top.
NOTE: Do not load envelopes while the printer is printing.
4. Slide the paper-width guides till they t snugly against the sides of the envelope.
To load cards and photo paper
1. Open the top cover and lift the control panel.
2. Slide the two paper-width guides out as far as possible.
3. Insert the paper print-side up and slide the paper-width guides till they t snugly against the sides of
the paper.
NOTE: Do not load paper while the printer is printing.
ENWW Load paper 13
To Next Page
Loading...