You can open the embedded Web server by using these methods:
• Web browser: In a supported Web browser on your computer, type the IP address or
hostname that has been assigned to the device.
For example, if the IP address is 123.123.123.123, type the following address into the Web
browser: http://123.123.123.123.
The IP address and hostname for the device are listed on the status report. For more
information, see
Understand the network configuration page (some models only).
After opening the embedded Web server, you can bookmark it so that you can return to it
quickly.
• Windows taskbar: Right-click the HP Digital Imaging Monitor icon, point to the device you
wish to view, and then click Network Settings (EWS).
• Windows Vista: In the Network list of devices, right-click the device icon and then select
View device webpage.
Embedded Web server (some models only) 211
To Next Page
Loading...