Shared voice/fax with computer DSL/ADSL modem
Use these instructions if your computer has a DSL/ADSL modem
Figure B-10 Back view of the printer
1 Telephone wall jack
2 Parallel splitter
3 DSL/ADSL filter
4 Telephone
5 Computer DSL/ADSL modem
6Computer
7 Use the phone cord provided to connect to the 1-LINE port on the back of the printer.
You might need to connect the supplied phone cord to the adapter provided for your country/
region.
NOTE: You need to purchase a parallel splitter. A parallel splitter has one RJ-11 port on the front
and two RJ-11 ports on the back. Do not use a 2–line phone splitter, a serial splitter, or a parallel
splitter which has two RJ-11 ports on the front and a plug on the back.
Figure B-11 Example of a parallel splitter
148 Appendix B Additional fax setup ENWW
To Next Page
Loading...