Send &
Receive
Prints whenever there is any kind of fax error. This is the
default setting.
Off Does not print any fax error reports.
On Fax Send Prints whenever there is a transmission error.
On Fax Receive Prints whenever there is a receiving error.
Stop faxing
You can cancel a fax you are sending or receiving at any time.
To stop faxing from the control panel
➔
Press Cancel on the control panel to stop a fax you are sending or receiving.
Look for the Fax Cancelled message on the control panel display. If it does not
appear, press Cancel again.
The HP All-in-One prints any pages it has already started printing and then
cancels the remainder of the fax. This can take a few moments.
To cancel a number you are dialing
➔
Press Cancel to cancel a number you are currently dialing.
User Guide 71
Fax
To Next Page
Loading...
