9. Carefully lower the latch handle.
NOTE: Make sure you lower the latch handle before reinserting the ink
cartridges. Leaving the latch handle raised can result in incorrectly seated ink
cartridges and problems printing. The latch must remain down in order to correctly
install the ink cartridges.
10. Using the colored shaped icons for help, slide the ink cartridge into the empty slot
until it clicks into place and is seated firmly in the slot.
11. Close the ink cartridge door.
Device Disconnected
Use the following to correct the error:
Hardware installation suggestions
Chapter 4
102 Maintain and troubleshoot
To Next Page
Loading...