HP Officejet 9100 - Page 135

ENWW Installing the all-in-one software and configuring the all-in-one for operating environments 133
Send a scan to a
network folder
1 Connect the all-in-one to the
network.
2 Set or change the IP address
for the all-in-one in the
embedded Web server, if
necessary.
3 Configure the network folder
settings in the embedded
Web server.
Note:
Sending a scan to a network
folder does not require the
all-in-one software for direct
connection.
Not applicable. Not applicable.
Send a photo as
an e-mail
attachment
1 Connect the all-in-one to the
network.
2 Install the software for
network connection.
3 Set the IP address for the
all-in-one in the embedded
Web server, if necessary.
1 Install the software for direct
connection, which includes
connecting the all-in-one to
the computer.
Not applicable.
Scan from a
TWAIN-compliant
program
1 Connect the all-in-one to the
network.
2 Install the software for
network connection.
1 Install the software for direct
connection, which includes
connecting the all-in-one to
the computer.
Not applicable.
In order to use
this feature . . .
. . . you must complete these setup steps.
Network connection
(connected to a network
through a network
connection or other
computer)
Direct connection
(connected directly to a
computer with a USB or
parallel cable)
No connection
(not connected to a
computer through a network
or a direct connection)