To print the print quality diagnostic page
Use the print quality diagnostic page to diagnose issues affecting the print quality. This
helps you decide whether to run any maintenance tools to improve the print quality of
your printouts. You can also view the ink level information, and the printhead health
status on the page.
NOTE: Before printing the print quality diagnostic page, make sure you load
paper. For more information, see
Load media.
Ink level warnings and indicators provide estimates for planning purposes only.
When you receive a low-ink warning message, consider having a replacement
cartridge available to avoid possible printing delays. You do not need to replace
cartridges until prompted to do so.
• Control panel: Press the OK button, select Information and then press the OK
button. Press right arrow
to select Print Quality Page and then press the OK
button.
• Embedded Web server: Click the Tools tab, click Print Quality Toolbox in the
left pane, select Print Quality Report.
• HP Software (Windows): Open the HP software that was included with the
printer. Click the Device Services tab, and then click Print the Print Quality
Diagnostic Page and follow the onscreen instructions.
• HP Utility (Mac OS X): Click Print Quality Diagnostics from the Information
and Support panel.
Solve print quality problems
41
To Next Page
Loading...
