1. General Information: Shows information about the current status and active connection type of
the network, and other information, such as the URL of the embedded web server.
2. 802.3 Wired: Shows information about the active Ethernet network connection, such as the IP
address, subnet mask, default gateway, as well as the hardware address of the printer.
3. 802.11 Wireless: Shows information about your wireless network connection, such as the host
name, IP address, subnet mask, default gateway, and server. It also indicates the network name
(SSID), the relative signal strengths and the channels being used. You can check the network
list to view if your own network signal strength is good and change the wireless communication
setup using Wireless Setup Wizard. For more information, see
Change from an Ethernet
connection to a wireless connection on page 107.
ENWW Understand printer reports 127
To Next Page
Loading...
