Table 1-1 10 tap test results, row 68 (continued)
Column Code Acceptable values
Column 7 DSID_IDS_FIRST_CHARGE_REQUIRED 0–internal use only.
Column 8 DSID_PRINTHEAD_CAL_NEEDED A value of 0 indicates that OOBE calibrations (not IQ
calibrations) are complete. This is so the messaging is
complete for the calibrations. For example, if this value is 0,
but the CAL_OOBE_STATE=1, you will get the printed OOBE
calibrations, but the control panel may display Preparing
instead of Calibrating.
Figure 1-20 10 tap test results
68. Startup complete: 1 255 1 2 0 0 0 0
18 Chapter 1 Removal and replacement ENWW
To Next Page
Loading...
