8. Click Finish to continue copying files to the computer. The remaining plug-and-play events for the
HP LaserJet P2015 PCL 6 driver are automatic.
Figure 3-11 Add New Hardware Wizard – Finish dialog box
9. Click Start, click Settings, and then click Printers to confirm that the HP LaserJet P2015 driver is
installed.
Add-Printer Wizard installation for network connections in Windows Server 2003
The SETUP.EXE program on the HP LaserJet P2015 printing-system CD is not supported in Windows
Server 2003. Use the Microsoft Add-Printer Wizard for network connections or using a plug-and-play
installation for direct USB connections to install the printer driver.
Follow these steps to install the HP LaserJet P2015 printing-system software on a computer running
Windows Server 2003.
1. Quit all open programs.
2. Insert the HP LaserJet P2015 printing-system CD into the CD-ROM drive on the computer.
NOTE: If the CD starts automatically, click Exit to exit the installation program and continue with
step 3.
3. Open Printers and Faxes and double-click Add Printer.
4. Click Next on the Welcome screen.
5. Follow the onscreen instructions.
6. When prompted for a location of the driver, browse to the following location on the
HP LaserJet P2015 software CD:
<CD ROM drive>:\drivers\Win2000_XP
92 Chapter 3 Install MS Windows printing-system components ENWW
To Next Page
Loading...