Windows software installation options
The printing-system software can be used with the product in the following configurations:
●
Direct Connection. Install the printing-system software on a computer that is directly connected
to the product through a USB port and running Windows 2000, Windows Server 2003, Windows
XP, or Windows Vista.
In this configuration, the product is not shared. A single user has complete physical control over
the product. In this configuration, access is available to all of the product features.
●
Network connection using on-board networking (HP LaserJet P2035n). Install the printing-
system software on a computer that is running Windows 2000, Windows XP, or Windows Vista and
that has access to a local area network (LAN) to which the product is also connected . Network
models have on-board networking that connects to a LAN through a 10/100Base-T (RJ-45) port.
The following elements are required for a networked product:
◦
An installed network that uses the TCP/IP network protocol
◦
A cable for the type of network connection (not included)
Animated Getting Started Guide (eGSG)
When you insert the printing-system software CD into the CD-ROM drive, the Animated Getting Started
Guide starts automatically. The Begin Setup screen appears.
Figure 3-2 Animated Getting Started Guide – Welcome screen
ENWW Windows software installation options 47
Install Windows software
and utilities
To Next Page
Loading...
