Computer feet
Description Spare part number
Rubber Foot Kit (includes 4 base enclosure rubber feet) 468823-001
The computer feet are adhesive-backed rubber pads. The feet attach to the base enclosure in the locations
illustrated below.
Battery
Description Spare part number
6-cell, 2.55-Ah, 55-Wh Li-ion 468816-001
4-cell, 2.55-Ah, 37-Wh Li-ion 468815-001
Before disassembling the computer, follow these steps
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
Remove the battery:
1.
Turn the computer upside down on a flat surface with the battery bay toward you.
2. Slide and release the left battery release latch (1).
NOTE: The left battery release latch automatically returns to its original position.
3. Slide the right battery release latch (2) to release the battery from the battery bay.
32 Chapter 4 Removal and replacement procedures
To Next Page
Loading...
