Keyboard
For use in: Spare part number For use in: Spare part number
Japan 468817-291 Thailand 468817-281
South Korea 468817-AD1 The United States 468817-001
Taiwan 468817-AB1
Before removing the keyboard, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 32).
5.
Remove the hard drive (see
Hard drive on page 40).
Remove the keyboard:
1.
Remove the four Phillips PM2.5×7.0 screws that secure the keyboard to the computer.
2.
Turn the computer right-side up, with the front toward you.
3.
Open the computer as far as possible.
4. Lift the rear edge of the keyboard (1) until it rests at an angle.
42 Chapter 4 Removal and replacement procedures
To Next Page
Loading...
