11 – 2 Maintenance and Service Guide
Recycling
Perform the following steps to disassemble the display assembly:
1. Remove all screw covers 1 and screws 2 that secure the display bezel to the display assembly.
2. Lift up and out on the left and right inside edges 1 and the top and bottom inside edges 2 of the display bezel
until the bezel disengages from the display assembly.
3. Remove the display bezel 3.
4. Disconnect all display panel cables 1 from the display inverter and remove the display inverter 2.
To Next Page
Loading...
Need help?
General