Chapter 5: Sharing Images 49 Transmitting Images Between Two Cameras
Receiving Images from Another Camera
To receive images from another Digita camera:
1 Set the camera mode dial to Review mode .
2 Power on the camera if you haven’t already.
3 Press the MENU button on the back of the camera. The Review mode menus are displayed.
4 Press the right arrow on the 4-way controller two times to move to the Transmit menu. The
Camera-Camera menu option is highlighted.
5 Press the middle (Receive) soft key on your camera.
6 Set the other camera to send images. See the other camera’s documentation for details.
7 Aim your camera’s infrared window (see Figure 26 on page 46) at the other camera’s infrared
sensor, and set the cameras about 10 inches apart.
8 Send the images from the other camera. See the other camera’s documentation for details.
9 Press the right (Done) soft key when your camera has received all of the images.
To Next Page
Loading...
