HP photosmart 850 - Setup

14 hp photosmart 850 user’s manual
Setup
Attaching the lens cap tether
1 With the front of the camera facing
you, insert the small loop of the lens
cap tether through the neck strap
mount on the right side of the camera.
2 Insert the long loop of the tether
through the small loop and pull to
tighten the knot.
3 Insert the long loop of the tether
through the lens cap tether mount.
4 Pull the long loop over the
sides of the lens cap and then
under the lens cap, as shown.
Pull to tighten the knot.
6 Lens cap tether
mount
Allows you to attach a tether to the
lens cap
7 Tripod mount Allows you to mount the camera to
a tripod
8 Camera Dock
connector
Allows you to connect the camera to
the optional HP Camera Dock
9 Battery door Allows access to insert and remove
the batteries
10 Microphone Records audio clips
# Name Description