HP Photosmart A310 series Setup Guide

3
1
2
Plug in the power cord
1. Connect the power cord to the back of the printer.
2. Plug the power cord into a working electrical outlet.
3. Press On to turn on the printer.
At this point, the printer lights will flash to indicate you
need to load paper and install the print cartridge.
Please proceed to the next step.
On button
Unpack the printer
Remove the protective tape from inside and around the
printer.
The box contains the following items:
1. HP Photosmart A310 series printer
2. Setup Guide (this poster)
3. User Guide
4. HP Photosmart software and electronic Help on CD
5. Power supply
6. HP Advanced Photo Paper and resealable media
bag
7. HP 110 Tri-color Inkjet print cartridge
Note: Contents may vary by country/region. Please
check the packaging for the official box contents.
1234
Load paper in the printer
1. Open the output tray on the front of the printer. The
input tray opens automatically.
2. Place a few sheets of HP Advanced Photo Paper
(sample pack included) in the input tray with the
glossy sides facing toward you.
3. Align the paper against the left side of the input tray.
Adjust the paper-width guide to fit close to the right
edge of the paper without bending it.
Paper-width guide
Input tray
Setup Guide
HP Photosmart A310 series
*Q8471-90952*
Q8471-90952
Remove the tape on the
print cartridge
1. Open the print cartridge package. Pull the pink
pull-tab to remove the clear tape from the print
cartridge.
2. Open the print cartridge door.
Do not touch or remove the
ink nozzles or the copper-
colored contacts!
Print cartridge door
Output tray
Glossy side
1
3
6 7
4 5
2
3
1
2
1
2

HP Photosmart A310 series Specifications

General

Printer Type	Photo Printer
Maximum Print Resolution	4800 x 1200 dpi
Supported Paper Sizes	4 x 6 in
Direct Printing	Yes (PictBridge)
Media Types	Photo paper, plain paper
Connectivity	USB 2.0