HP Photosmart C7200 All-in-One series - Page 46

3. Dry the glass with a dry, soft, lint-free cloth to prevent spotting.
4. Turn on the HP All-in-One.
To clean the glass strip inside the automatic document feeder
1. Turn off the HP All-in-One.
2. Lift the cover of the automatic document feeder.
3. Lift the automatic document feeder mechanism.
There is a glass strip under the automatic document feeder mechanism.
4. Clean the glass strip with a soft cloth or sponge slightly moistened with a nonabrasive
glass cleaner.
CAUTION: Do not use abrasives, acetone, benzene, or carbon tetrachloride on
the glass, since they can damage it. Do not place or spray liquid directly on the
glass. The liquid might seep under the glass and damage the device.
5. Lower the automatic document feeder mechanism, and then close the cover of the
automatic document feeder.
6. Turn on the HP All-in-One.
Clean the lid backing
Minor debris can accumulate on the white document backing located underneath the lid
of the HP All-in-One.
Chapter 4
44 Use the HP All-in-One features
Use the HP All-in-One features