HP Photosmart C7200 All-in-One series

To clean the glass
1. Turn off the HP All-in-One, and raise the lid.
2. Clean the glass with a soft cloth or sponge slightly moistened with a nonabrasive
glass cleaner.
CAUTION: Do not use abrasives, acetone, benzene, or carbon tetrachloride on
the glass, since they can damage it. Do not place or spray liquid directly on the
glass. The liquid might seep under the glass and damage the device.
3. Dry the glass with a dry, soft, lint-free cloth to prevent spotting.
4. Turn on the HP All-in-One.
To clean the glass strip inside the automatic document feeder
1. Turn off the HP All-in-One.
2. Lift the cover of the automatic document feeder.
3. Lift the automatic document feeder mechanism.
There is a glass strip under the automatic document feeder mechanism.
4. Clean the glass strip with a soft cloth or sponge slightly moistened with a nonabrasive
glass cleaner.
CAUTION: Do not use abrasives, acetone, benzene, or carbon tetrachloride on
the glass, since they can damage it. Do not place or spray liquid directly on the
glass. The liquid might seep under the glass and damage the device.
Chapter 13
156 Maintain the HP All-in-One
Maintain the HP All-in-One