TV ConfiguratioH
This setting allows you to setthe format of the video signal for
displaying camera images on a television (TV) that is
connected to the camera with an optional HP Photosmart R-
series camera dock.
Thedefault TV Configuration setting depends on the language
that you selected when you turned on the camera for the first
time.
In the Setup Menu (page 103),
seled TV Configuration
2 Inthe TV Configuration sub-menu,
highlight one of these two choices:
NTSC--Format used primarily
in North America and Japan
PAL--Format used primarily in
Europe
3 PressMenu/OK to save the setting and return to the Setup
Menu.
Thenew setting remains in effect until it ischanged again, even
when you turn the camera off.
For more information on connecting the camera to a TV, see
the User's Manual for the HP Photosmart R-seriescamera dock.
Chapter 6: Using the Setup Menu 107
To Next Page
Loading...
